Which one should we choose between J9150A and JD092B and 455883-B21 modules?

Which one should we choose between J9150A and JD092B and 455883-B21 modules?

To provide a stable, fast and scalable optical network, choosing and deploying the right optical equipment is one of the main challenges. We must always be aware of what our network needs seamlessly. When it comes to optical transceivers, choosing the right one can be one of the hardest parts because of the many manufacturers. However, there are some caveats:

Always be aware of which type of fiber is needed, single mode or multimode. In general, multimode fibers are used for more short-range connections in local area networks (LANs) and single-mode fibers are used for more long-range connections in data centers and service providers.
Determine whether you need full duplex or half duplex. Some transceivers only operate in full-duplex mode, and deploying them with half-duplex equipment such as switches and hubs will cause conflicts and potentially packet loss. It is highly recommended that you always use full duplex mode and equipment.
Check the temperature compatibility of the receivers. This is a very important point because it is often an overlooked feature of the transmitter and receiver. Keep in mind that photoreceptors should not be operated hot and will fail prematurely at high temperatures.

Among the many manufacturers that offer network equipment on the market, only a few stand out: HP (Hewlett Packard). ARioonet, Cisco, Juniper, ZTE, Ericsson, Huawei, etc. HP Enterprise or Hewlett Packard offers a wide range of network equipment suitable for data centers, service providers and large enterprise users. They focus on high quality and extensibility. Their continued growth and strong success is a guarantee of quality and reliability.

HPE receivers offer a unique “wire once” feature that simplifies network and storage interfaces. Three of the most widely used and almost identical receivers are: J9150A, JD092B and 455883-B21:

The HPE J9150A SFP+ has 10 Gigabit Ethernet, up to 300 meters of connectivity via multimode fiber. It supports 10GBASE-SR standard. It is a simple, reliable and robust optical receiver mainly used in HP switches, routers and storage systems. This optical transceiver has LC and UPC connection option. Its maximum operating temperature is +70°C and it can also operate at 0°C.

Just like the J9150A SFP+, the HPE JD092B SFP+ transceiver offers 10 Gigabit Ethernet. It supports the 10GBASE-SR standard with a distance of up to 400 meters on OM4 multimode fiber. A stable wavelength of 850 nm provides maximum performance for short-range short circuiting. This transceiver has an LC connection. Using this transceiver provides reliable performance and allows businesses to cost-effectively extend their networks over long distances. This transceiver is optimally used with HP A5830AF, HPE 12504, 5120, 5500, 5810, 5900AF, 5920AF.

The HPE 455883-B21 SFP+ Transceiver is a transceiver with two LC type connectors. It is a plug-in module that supports the 10GBASE-SR standard and has a distance of up to 984 feet. or 300 meters This transceiver is mainly used with HPE D2D4324, BLc3000 Enclosure and ProLiant DL360p Gen8 systems.

Depending on the network project, the type of network architecture and the equipment used, the choice of HP Enterprise receivers always offers high quality and maximum performance for their deployment mainly in cloud computing and HP storage solutions.

Eriont is a producer of Hp modules in Iran.