Manage Switch(AR-SW24P-410G)
Layer 3 management switch with 10G uplink
Overview
AR-SW24P-410G is a layer 3 management switch that is managed in two PoE models and without poe, developed by Arivant Design Information Technology. It has 24*10/100/1000Base-T RJ45 ports and 4*1/10G SFP+ fiber slot ports. Port 1-24 can support IEEE802.3af/on standard PoE power supply. The single port PoE power is 30 watts and the maximum PoE output power is 400 watts (at -600 watts). As a PoE power supply, it can automatically detect standard-compliant power receiving equipment and supply power through the network cable.
This device can supply POE terminal equipment such as wireless AP, webcam, VoIP phone, etc. through a network cable to supply the network environment that needs high-power PoE power supply. In addition to being used as network infrastructure in data centers and companies, it is suitable for campuses, factory dormitories, and medium and large companies.
AR-SW24P-410G has full L3 network management function, supports IPV4/IPV6 management, full routing, full security protection, ACL/QoS policy and VLAN functions, and it is easy to manage and maintain. It supports multiple STP/RSTP/MSTP (<50ms) network transmission protection protocols and (ITU-T G.8032) ERPS to improve link backup and network reliability.
When a one-way network goes down, communication can be quickly established through the other link to provide uninterrupted critical communications. According to the actual requirements of the network structure, you can configure multiple application services such as PoE power management, port traffic control, VLAN division and SNMP through the web.
Capabilities
Gigabytes, 10G uplink
All sections support “Gigabit Ethernet port and 10G SFP+ uplink port”, which enables users to build network flexibility to meet the needs of different scenarios.
◇ full support full-duplex based on IEEE802.3x and half-duplex based
Smart PoE power supply
24*10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs.
Security monitoring, remote conferencing system, wireless coverage and other scenarios.
◇ IEEE 802.3af/in PoE standard, without harming non-PoE devices.
The prioritization system for the PoE port provides the port with the highest priority level the first time during power-up.
Set the port with PoE network management, PoE port power allocation, priority setting.
View power status, activation schedule
security
◇ 802.1X authentication
◇ Port isolation, storm control.
◇ IP-MAC-VLAN-Port connection.
The ability to process large amounts of data
◇ IEEE802.1Q VLAN, flexible VLAN section, voice VLAN and QinQ configuration.
o QoS, priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR and SP+WRR.
◇ ALC, data packaging through the configuration of matching rules, processing operations and
Allowing time, and flexible and secure access control
◇ IGMP V1/V2 and IGMP Snooping.
◇ ERPS/STP/RSTP/MSTP.
◇ Static and dynamic aggregation.
Stable and reliable
Low power consumption, no fan, galvanized steel box.
Stable PoE output
◇ CCC, CE, FCC, RoHS.
User-friendly panel, can show device status through PWR, SYS, Link, L/A, PoE LED indicators.
Easy performance management and maintenance
◇ Web management, command line CLI (console, Telnet), SNMP (V1/V2/V3).
HTTPS, SSLV3 and SSHV1/V2.
◇ RMON, system log, LLDP and port traffic statistics.
CPU monitoring, memory monitoring, ping test and cable detection.
Technical Specifications
| Model | AR-24p410G | |
| Interface Characteristics | ||
| Fixed Port | 24*10/100/1000Base-T PoE ports (Data/Power)4*1/10G uplink SFP+ fiber slot ports (Data)
1*Console RS232 port (115200,N,8,1) |
|
| Ethernet Port | Port 1-24 can support 10/100/1000BaseT auto-sensing,Full/half duplexMDI/MDI-X self-adaption | |
| Twisted PairTransmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter)100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter) |
|
| Optical Fiber Port | 10G SFP+ optical fiber port, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module.LC) | |
| Optical Cable/Distance | Multi-mode:850nm 0~300M(10G) ,850nm 0~500M (1.25G); Single-mode:1310nm 0~40KM,1550nm 0~120KM. | |
| Chip Parameter | ||
| NetworkManagement Type | L3 | |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-TIEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X, IEEE802.3ae 10GBase-LR/SR, IEEE802.3x |
|
| Forwarding Mode | Store and Forward(Full Wire Speed) | |
| Switching Capacity | 598Gbps (non-blocking) | |
| ForwardingRate@64byte | 95.23Mpps | |
| MAC | 32K | |
| Buffer Memory | 32M | |
| Jumbo Frame | 9.6K | |
| LED Indicator | Power: PWR (yellow), system:SYS (yellow); network:Link (yellow);PoE: PoE (green); Fiber port : L/A (green) | |
| Reset Switch | Yes, support one key to restore factory settings | |
| PoE & Power Supply | ||
| PoE Port | Port 1 to 24 | |
| PoE Management | PoE working statusDelay start of power supply
PoE output priority configuration Scheduling of PoE operation and time Total power limit of PoE power supply PoE output power allocation, off& af &at |
|
| Power Supply Pin | Default: 1/2 (+), 3/6 (-) | |
| Max Power Per Port | 30W, IEEE802.3af/at | |
| Total PWR / InputVoltage | 400W/ (AC100-240V) | 600W/ (AC100-240V) |
| Power Consumption | Standby<25W, Full Load<400W | Standby<30W, Full Load<600W |
| Power Supply | Built-in power supply,AC100~240V 50-60Hz 5A | Built-in power supply, AC100~240V50-60Hz 6.6A |
| Physical Parameter | ||
| Operation TEMP /Humidity | -20~+55°C;5%~90% RH Non condensing | |
| Storage TEMP /Humidity | -40~+80°C;5%~95% RH Non condensing | |
| Dimension (L*W*H) | 440*290*44.5mm | |
| Net /Gross Weight | <4.4kg / <5.0kg | <4.6kg / <5.3kg |
| Installation | Desktop type ,19 inch 1U cabinet installation | |
| Certification & Warranty | ||
| Lightning protection / protection level | Lightning protection: 4KV 8/20us; Protection level: IP30 |
| Certification | CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B;RoHS |
| Warranty | 3 years, lifelong maintenance. |
| Network Management Features | |
| Interface | IEEE802.3X (Full-duplex)Port temperature protection setting
Port green Ethernet Energy-saving setting Broadcast storm control based on port speed The speed limit of the message flow in the access port. The minimum particle size is 64Kbps. |
| Layer 3 Features | L3 network management ,IPV4/IPV6 managementL3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs |
| VLAN | 4K VLAN based on port, IEEE802.1qVLAN based on the protocol
VLAN based on MAC Voice VLAN, QinQ configuration Port configuration of Access, Trunk, Hybrid |
| Port Aggregation | LACP, Static aggregationMax 14 aggregation groups and 8 ports per group. |
| Spanning Tree | STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) |
| Industrial RingNetwork Protocol | G.8032 (ERPS),Recovery time less than 20ms 250 Ring at most, Max 1024 devices per ring. |
| Multicast | MLD Snooping v1/v2,Multicast VLANIGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out |
| Port Mirroring | Bidirectional data mirroring based on port |
| QoS | Flow-based Rate Limiting |
| Flow-based Packet Filtering8*Output queues of each port
802.1p/DSCP priority mapping Diff-Serv QoS,Priority Mark/Remark Queue Scheduling Algorithm (SP, WRR, SP+WRR) |
|
| ACL | Port-based Issuing ACL,ACL based on port and VLANL2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. |
| Security | IP-MAC-VLAN-Port bindingARP inspection,Anti-DoS attack
AAA & RADIUS,MAC learning limit Mac black holes,IP source protection IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum SSH 2.0,SSL,Port isolation,ARP message speed limit User hierarchical management and password protection |
| DHCP | DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay |
| Management | One-key recoveryCable Diagnose,LLDP
Web Management (HTTPS) NTP,System work log,Ping Test CPU instant utilization status view Console/AUX Modem/Telnet/SSH2.0 CLI Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3 arioonet NMS – smart network management system platform(LLDP+SNMP) |
| System | Category 5 Ethernet network cableWeb browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 |
| or higher, Microsoft Internet Explorer10 or later;TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network |
